Toy UV printer is widely used in toy printing. Not only that, it can also print more objects. We have talked a lot before, so we won't repeat it. Let's talk about some professional terms. Through the collection of all aspects on the Internet, we can understand the photolysis and adsorption of toy UV printer.
The stability of UV ink viscosity of toy printer is the most basic. Too high or too low UV ink viscosity of toy printer will not have a good effect on printing, so the viscosity of ink should be controlled within the specified range. UV ink of toy printer will volatilize during placement, and the viscosity will become higher. Therefore, the viscosity of ink should be measured frequently.
The dryness of UV ink in toy printer is also very important. If the ink dries too fast, the pattern will become very dry and the effect does not look very good. If it dries too slowly, it will be easy to be contaminated with some dust and the like. The dryness of printing is related to the area of the pattern.
Special catalyst
More than 27 kinds of corresponding inert catalysts are configured according to different exhaust gas components. The catalyst uses honeycomb metal mesh as the carrier and contacts with the light source in an all-round way. The inert catalyst catalyzes the reaction below 338 nm light source, amplifying the effect of light source by 10-30 times, making it fully react with exhaust gas, shortening the contact time between exhaust gas and light source, so as to improve the purification efficiency.
UV photolysis + activated carbon adsorption
UV photolysis technology uses a special high-energy high ozone UV ultraviolet beam to decompose oxygen molecules in the air to produce free oxygen, namely reactive oxygen species. Due to the imbalance of positive and negative electrons carried by free oxygen, it needs to be combined with oxygen molecules to produce ozone. Ozone has a strong oxidation effect on organic matter, and has a good removal effect on industrial VOCs organic gases and other irritating odors.
After the industrial waste gas is input into the UV photolysis equipment by the exhaust equipment, the high-energy UV ultraviolet beam and ozone conduct the cooperative decomposition and oxidation reaction on the waste gas to degrade and convert the industrial waste gas into low molecular compounds, water and carbon dioxide; High energy-c beam is used to split the molecular chain of bacteria in waste gas, destroy the nucleic acid (DNA) of bacteria, and then conduct oxidation reaction through ozone to completely achieve the effect of purifying and killing bacteria.
These are determined by the printing principle of toy UV printer. Its piezoelectric inkjet printing principle is mainly short version digital printing. Compared with traditional silk screen printing, offset printing and other processes, the speed is slower. But the advantage of UV printer is that DIY customizes all kinds of 3D relief three-dimensional pattern printing, which is its biggest advantage. When choosing a toy printer, the raw materials printed should also match it. If you take a UV printer to print an advertisement, there must be no profit. However, this kind of equipment can be used to print mobile phone cases, leather, ceramic tiles, glass background walls and other raw materials.
