Moisture proof problems of materials related to UV flat panel printer in rainy days

  • 2022-04-25
  • 1627

The rainy season ushers in a rainy summer climate, especially in the south. In the production of UV printing, UV flat-panel printer will encounter some problems related to waterproof and moisture-proof in this season. In this case, how to find a solution?

In many advertising shops or advertising spray painting companies, many spare printing consumables of different materials will be stored, such as spray painting cloth, photo paper and other materials. In particular, paper materials should be stored carefully. They can be placed high on relevant shelves and should not be close to walls, floors or windows as far as possible. These are places prone to water dripping and moisture. Unused materials should be packaged in packaging boxes or plastic bags as far as possible, Store in a dry room or warehouse with appropriate humidity. In addition, pay attention to the problem of water immersion in low-lying areas.

In the past, in addition to the storage of printing materials related to UV flat-panel printer, attention should also be paid to when printing pictures by UV flat-panel printer. In rainy and humid weather, UV flat-panel printer will have some small faults when printing pictures. The viscosity and consistency of ink are different due to the influence of weather humidity. For example, the ink on the output picture of UV flat-panel printer dries very slowly, especially the black part, Sometimes the drying of the picture after output is relatively slow, which will affect the working hours of advertising production. In addition, the problem of moisture between the ink and the printing materials may cause the ink to spread and halo when it is wet.

Finally, if the above conditions are not met, you can use the hair dryer to turn on the cold air or warm air to dry the picture, but the wind speed should not be too high. You can't blow directly against the picture, and blow back and forth evenly as far as possible at a certain distance from the picture. Don't use hot air to blow, so as to avoid damage to the picture and loss.