In spring, all kinds of creatures breed rapidly, especially mice do great harm to toy UV printers. We all know that mice live by biting all kinds of objects. It doesn't care what lines you have, whether you can eat or not. When you see something, you will bite. Sometimes you will find that the lines of toy UV printers are obviously bitten by mice, resulting in the direct shutdown of the machine. Therefore, if you don't pay attention to daily protection, it is easy to cause the line to be bitten. If some careless people don't cut off the power, it will directly lead to the line burning. Next, Fengda intelligent will introduce some solutions to this situation.
Precautions:
1. In daily work, if the spider web crane is found, it shall be removed in time, the waste products in the workshop shall be cleaned every day, and the waste bucket shall be cleaned every day;
2. The maintenance department is responsible for maintaining the firmness of all doors and windows in the production area. When installing equipment or water pipes, if cracks or holes are caused in the surrounding walls, they will be repaired in time;
3. The production workshop shall do a good job in rat prevention, the drainage outlet shall be equipped with a mesh cover, and all the drainage outlets in the workshop shall be equipped with an iron mesh to prevent rats from drilling people.
Control measures:
1. Rat killing points shall be set in the plant area and production area, and rat sticking plates and mousetraps shall be set at the rat killing points;
2. Install rat proof board at the entrance of the workshop.
Personnel specification requirements:
1. Do not eat or snack in the UV flat-panel printer workshop. If it is inevitable, do not put food residues and waste food in the trash can. The spilled rice dishes and spilled oil must be cleaned up;
2. Fruit, biscuits, candy and other snacks should not be stored in the drawer of the desk where the UV tablet printer controls the computer;
3. After the operator turns off the equipment every day, pay attention to the power-off protection and check whether there is food residue inside and outside the machine.
